S7 Wheelchair Stairlift
The Terry S7 lift is designed for wheelchair users and less mobile people. The lift is convenient and easy to operate, folds up, parks and has many built-in safety features. The Terry S7 lift is designed for straight staircases and can be fitted directly to a wall or supported on stanchion posts. The user can operate the lift independently, because the barrier arms and ramps are powered. When the lift is not in use, it can be folded and parked with a depth of only 285mm from the wall, so it won’t block up the staircase. The user can call the lift even when it is folded.
Reliable
The Terry S7 is reliable and complies with British and European safety standards. Safety features ensure that it is impossible to operate the lift until the barrier arms and ramps are folded and in place. The lift stops automatically at the upper and lower landings. Constant pressure controls allow the user to stop the lift at any time.
Because the ramps and platform undertray are pressure sensitive, the lift stops automatically if it meets an obstruction on the staircase. If the power to the lift fails, the lift can be operated using the manual hand-wind handle.
Safety Features
- Rack and pinion drive.
- Overspeed governor.
- Low voltage (24 volt) controls.
- Manual hand-wind.
- Manual release of barrier arms and platform.
- Emergency stop buttons.
- Key-switched controls.
- Thermal overload.
- Electrical components to IP65.
- Pressure sensitive ramps and undertray.
